53 research outputs found
Graphene-black phosphorus printed photodetectors
Layered materials (LMs) produced by liquid phase exfoliation (LPE) can be used as building blocks for optoelectronic applications. However, when compared with mechanically exfoliated flakes, or films prepared by chemical vapor deposition (CVD), LPE-based printed optoelectronic devices are limited by mobility, defects and trap states. Here, we present a scalable fabrication technique combining CVD with LPE LMs to overcome such limitations. We use black phosphorus inks, inkjet-printed on graphene on Si/SiO2, patterned by inkjet printing based lithography, and source and drain electrodes printed with an Ag ink, to prepare photodetectors (PDs). These have an external responsivity (R ext)ā¼337 A Wā1 at 488 nm, and operate from visible (ā¼488 nm) to short-wave infrared (ā¼2.7 Āµm, R ext ā¼ 48 mA Wā1). We also use this approach to fabricate flexible PDs on polyester fabric, one of the most common used in textiles, achieving R ext ā¼ 6 mA Wā1 at 488 nm for an operating voltage of 1 V. Thus, our combination of scalable CVD and LPE techniques via inkjet printing is promising for wearable and flexible applications
High-yield production of graphene sheets by graphite electro-exfoliation for application in electrochemical power sources
This thesis first aims at developing an electrochemical approach for low temperature, simple, and cost-effective synthesis of graphene microsheets (GNs) using graphitic electrodes in ionic liquid (IL) medium. The second major focus involves the products application as cathode-modifying microporous layers (MPLs) in proton exchange membrane fuel cells (PEMFCs) as well as anode-modifying materials in microbial fuel cells (MFCs). For the electrochemical exfoliation, a novel IL/acetonitrile electrolyte is introduced, and investigated with low concentration of ionic liquids. Using iso-molded graphite rod as the anode, up to 86% of exfoliation was achieved with the majority of the products as graphene flakes in addition to smaller quantities of carbonaceous particles and rolled sheets. Moreover, the simultaneous anodic and cathodic GN production was developed here with a synergistic exfoliation effect. When graphitic anode and cathode were subjected to a constant cell potential, up to 3 times higher exfoliation yields were generated compared to single-electrode studies on each side (~6-fold improvement in total). Thorough materials characterization confirmed the production of ultrathin GNs (< 5 layers) on both electrodes, with cathodic sheets being relatively larger and less functionalized. On the application side, the successful integration of GNs in MPLs resulted in enhanced PEMFC performance over a wide range of operating conditions. GN-based MPLs improved performance in the kinetic and ohmic regions of the polarization curve, while the addition of carbon black (CB), particularly Vulcan XC72, to form a composite GN+CB MPL, further extended the improvement to the mass transport limiting region. This was reflected by an approximate 30% and 70% increase in peak power densities compared to CB and GN MPLs, respectively, at the relative humidity (RH) of 100%. Despite the presence of CB, GN+CB MPLs also retained their superior performance at a much lower RH of 20%, thereby widening the peak power gap with CB MPLs to 80%. On the other side, the functionalized GN-modified carbon cloth anodes integrated within single-chamber MFCs generated an over four-fold improvement in peak power density compared to the plain carbon cloth (2.85 W m-Ā² vs 0.66 W m-Ā², respectively), exceeding the previously reported values with graphene anodes.Applied Science, Faculty ofGraduat
Fundamental studies on solar-activated zeolite-supported photocatalysts for water splitting application
Robust calculations show that the incidence of solar energy on the earthās surface by far exceeds all human energy needs. Undoubtedly, the most trusted way of utilizing solar energy is to convert and store it in the form of an energy carrier such as hydrogen. Semiconductors capable of absorbing light energy so-called photocatalysts can potentially drive water splitting reaction for hydrogen generation.
In this research, fundamental studies on a new class of solar-activated supported photocatalysts for water splitting application are presented. This resulted in significantly higher rates of Hā production in comparison to the existing supported TiOā series under visible light. The composition comprises silico-aluminates (zeolite) as the support, titanium dioxides (TiOā) as the semiconductor, cobalt compounds as hydrogen evolution sites and heteropolyacids (HPAs) as multifunctional solid acids with excitability under visible light. Using this composition, I ended up with at least 2.6 times higher hydrogen evolution rates under visible light in comparison to Degussa P25, the best commercially available titania product. The chemical point of view of this successful combination was investigated, attributing the higher photocatalytic activity of the synthesized chemical compositions to the basicity of the matrix. The more basicity properties besides HPA presence can overcome the negative impacts of titania interactions with the zeolite which are band gap widening and anodic shift of the TiOā band edges.
Furthermore, the effect of cobalt precursors (nitrates and chlorides) on the photocatalytic activity of the prepared photocatalysts was also investigated. Although nitrate-based photocatalysts exhibited an improvement in the UV-VIS absorbance spectra toward visible light, they caused an almost 30% lower Hā production rate in comparison to the chloride salts. Overshadowing the poisoning and parasitic effects of Clā» anions on the photooxidation sites in the zeolite-supported composition was another notable outcome of this study. This suggests emulation of the core-shell photocatalysis concept insofar with providing a reasonable distance between redox sites. The results indicate the importance of zeoliteās structural and chemical properties as the photocatalyst support. This can be addressed through the selection of suitable zeolite types, taking an important step in the development of visible-light-activated photocatalysts based on earth-abundant materials.Applied Science, Faculty ofChemical and Biological Engineering, Department ofGraduat
Recommended from our members
CO2chemical conversion to useful products: an engineering insight to the latest advances toward sustainability
In the fossilāfuelābased economies, current remedies for the CO2 reduction from largeāscale energy consumers (e.g. power stations and cement works) mainly rely on carbon capture and storage, having three proposed generic solutions: postācombustion capture, preācombustion capture, and oxy fuel combustion. All the aforementioned approaches are based on various physical and chemical phenomena including absorption, adsorption, and cryogenic capture of CO2. The purified carbon dioxide is sent for the physical storage options afterwards, using the earth as a gigantic reservoir with unknown longāterm environmental impacts as well as possible hazards associated with that. Consequently, the ultimate solution for the CO2 sequestration is the chemical transformation of this stable molecule to useful products such as fuels (through, for example, FischerāTropsch chemistry) or polymers (through successive copolymerization and chain growth). This sustainably reduces carbon emissions, taking full advantage of CO2āderived chemical commodities, soācalled carbon capture and conversion. Nevertheless, the surface chemistry of CO2 reduction is a challenge due to the presence of large energy barriers, requiring noticeable catalysis. This work aims to review the most recent advances in this concept selectively (CO2 conversion to fuels and CO2 copolymerization) with chemical engineering approach in terms of both materials and process design. Some of the most promising studies are expanded in detail, concluding with the necessity of subsidizing more research on CO2 conversion technologies considering the growing global concerns on carbon management
Recommended from our members
Physicochemical impact of zeolites as the support for photocatalytic hydrogen production using solar-activated TiO2-based nanoparticles
Silico-aluminates (zeolites) have been recently utilized promisingly as the support for photocatalytic hydrogen production using solar-activated TiO2-based nanoparticles. Aside from conventional advantages offered by the supports in photocatalysis, we demonstrate the unique physicochemical impact of zeolites on photocatalytic hydrogen production. Beside zeolites, our synthesized materials comprise titanium dioxide (TiO2) as the semiconductor, cobalt ions as the hydrogen evolution sites, and heteropolyacids (HPAs) as the multifunctional solid acids with significant excitability under visible light. Four classes of zeolites (Na-Y, Na-mordenite, H-Y, and H-beta) with different Si/Al ratios and sodium contents were evaluated. Among the studied photocatalysts, Na-Y and Na-mordenite containing 10 wt% titania emerged as the potential candidates for the hydrogen evolution reaction, with corresponding rates of 250.8 and 187.2 Ī¼mol/g h, in comparison to 84.2 Ī¼mol/g h for Degussa P25; while these values for H-Y and H-beta were 96.8 and 100.1 Ī¼mol/g h, respectively. The higher photocatalytic activity of the first two classes is attributed to the basicity of the zeolite matrix, which is possibly due to the pH dependency of the TiO2 band edges. The results indicate the importance of controlling the chemical properties of the zeolite as a photocatalyst support through the selection of suitable types. Furthermore, our analyses show that the precise pore size distribution of the zeolite framework rules over accommodating the impregnated species whether in the pores or on the surface. This ultimately enables a vast array of synthesis opportunities for development of the-state-of-the-art solar-activated photocatalysts based on earth-abundant materials
Recommended from our members
High-yield graphene production by electrochemical exfoliation of graphite: novel ionic liquid (IL)āacetonitrile electrolyte with low IL content
Electrochemical exfoliation of graphite assisted by ionic liquids (ILs) has been proposed as a high-throughput, green and scalable graphene production technique. Previous research has focused on IL/water electrolytes with high IL content (from 1:0.1 to 1:1 IL/water volume ratios). Here, we introduce and investigate a novel IL/acetonitrile electrolyte with dramatically lower loads of ionic liquids (ā¼1:50 IL/acetonitrile vol. ratio). Our approach provides three main advantages: cost efficiency due to low IL content, extended electrochemical stability in a non-aqueous electrolyte, and high exfoliation yield by effective anionic intercalation within the graphitic layers. Using iso-molded graphite rod as the anode, we achieved up to 86% of exfoliation with the majority of the products as graphene flakes in addition to smaller quantities of carbonaceous particles and rolled sheets. We also demonstrate by Raman spectroscopy the beneficial sonication effect on improving the quality of the graphene-based products. Moreover, in contrast with previous literature, we prove that the electrolyte coloration during electro-exfoliation in the IL media is related to the occurrence of diverse reactions involving the IL moieties and cannot be associated with different stages of graphene formation. The cathodically generated species can also interfere with the anionic intercalation in the graphite anode
Recommended from our members
Cobalt precursor role in the photocatalytic activity of the zeolite-supported TiO2-based photocatalysts under visible light: A promising tool toward zeolite-based coreāshell photocatalysis
A new class of supported photocatalysts is introduced recently with high activity under visible light for water splitting purposes. The composition comprises silicoaluminates (zeolite) as the support, titanium dioxide (TiO2) as the semiconductor, cobalt ions (Co2+) as the hydrogen evolution sites and heteropolyacid (HPA) as the multifunctional solid acid with visible light activity. From photocatalyst preparation point of view, the synthesis consists of three impregnation steps of TiO2, Co2+, and HPA, respectively, followed by a specific thermal treatment for each stage. The focus of this study is on the cobalt impregnation step. The objective is to investigate the impact of employing two commercially available cobalt precursors on the photocatalytic activity of the synthesized photocatalysts, especially hydrogen production rates. Nitrate and chloride compounds of cobalt were examined on two classes of the zeolites namely NaāY and NaāMordenite which have emerged as suitable supports for hydrogen evolution application. Although nitrate-based photocatalysts exhibited an improvement in the UVāVIS absorbance spectra toward visible light, they caused an almost 30% lower H2 production rate in comparison to the chloride salts. The favorable shift toward visible light is possibly due to the incorporation of nitrogen (N) anions in the photocatalyst structure. However, their lower hydrogen production rate is mainly attributed to the competitive photo-reduction reactions of remnant nitrate anions, suggesting chloride (Clā) species as a remedy of this so-called parasitic phenomenon. In addition, overshadowing the poisoning and parasitic effects of Clā ions on the photo-oxidation sites of the zeolite-supported composition was another notable outcome of this study. This emulates coreāshell photocatalysis concept insofar with providing a reasonable distance between redox sites
Exploring anomalous HZĪ³ couplings in Ī³-proton collisions at the LHC
The HZĪ³ coupling, which is highly sensitive to the new physics beyond the standard model, is studied through the process ppāpĪ³pāpHX at the LHC. To this purpose, an effective Lagrangian, in a model independent approach, with dimension six operators is considered in this paper. New interaction terms regarding beyond the standard model physics include the Higgs boson anomalous vertices in both CP-even and CP-odd structures. A detailed numerical analysis is performed to scrutinize the accurate constraints on the effective HZĪ³ couplings and to discuss how far the corresponding bounds can be improved. This is achieved by testing all the efficient Higgs decay channels and increasing the integrated luminosity at three different forward detector acceptance regions. The numerical results propose that the Higgs photoproduction at the LHC, as a complementary channel, has a great potential of exploring the HZĪ³ couplings
- ā¦